Appendix F. Configuring AGP

You can disable NVIDIA's AGP module (NVAGP) through the "NvAGP" option in your X config file. This same option is used with Linux and Solaris. Its effect for Solaris is as follows:

        Option "NvAgp" "0"  ... disables AGP support
        Option "NvAgp" "1"  ... use NVAGP, if possible
        Option "NvAgp" "2"  ... disables AGP support
        Option "NvAGP" "3"  ... use NVAGP, if possible

The default is 3.

If you are experiencing problems with stability, you may want to start by disabling AGP and observing if that solves the problems.

The following AGP chipsets are supported by NVIDIA's AGP driver; for all other chipsets it is recommended that you use the AGPGART module.

Supported AGP Chipsets
Intel 440LX
Intel 440BX
Intel 440GX
Intel 815 ("Solano")
Intel 820 ("Camino")
Intel 830M
Intel 840 ("Carmel")
Intel 845 ("Brookdale")
Intel 845G
Intel 850 ("Tehama")
Intel 855 ("Odem")
Intel 860 ("Colusa")
Intel 865G ("Springdale")
Intel 875P ("Canterwood")
Intel E7205 ("Granite Bay")
Intel E7505 ("Placer")
AMD 751 ("Irongate")
AMD 761 ("IGD4")
AMD 762 ("IGD4 MP")
AMD 8151 ("Lokar")
VIA 8371
VIA 82C694X
VIA P4M266
VIA P4X400
VIA K8T800
VIA K8N800
RCC 6585HE
Micron SAMDDR ("Samurai")
Micron SCIDDR ("Scimitar")
NVIDIA nForce2
NVIDIA nForce3
ALi 1621
ALi 1631
ALi 1647
ALi 1651
ALi 1671
SiS 630
SiS 633
SiS 635
SiS 645
SiS 646
SiS 648
SiS 648FX
SiS 650
SiS 651
SiS 655
SiS 655FX
SiS 661
SiS 730
SiS 733
SiS 735
SiS 745
SiS 755

If you are experiencing AGP stability problems, you should be aware of the following:

Additional AGP Information

AGP drive strength BIOS setting (Via-based motherboards)

Many Via-based motherboards allow adjusting the AGP drive strength in the system BIOS. The setting of this option largely affects system stability, the range between 0xEA and 0xEE seems to work best for NVIDIA hardware. Setting either nibble to 0xF generally results in severe stability problems.

If you decide to experiment with this, you need to be aware of the fact that you are doing so at your own risk and that you may render your system unbootable with improper settings until you reset the setting to a working value (w/ a PCI graphics card or by resetting the BIOS to its default values).

System BIOS version

Make sure you have the latest system BIOS provided by the motherboard manufacturer.

On ALi1541 and ALi1647 chipsets, NVIDIA drivers disable AGP to work around timing and signal integrity problems. You can force AGP to be enabled on these chipsets by setting NVreg_EnableALiAGP to 1. Note that this may cause the system to become unstable.

Early system BIOS revisions for the ASUS A7V8X-X KT400 motherboard misconfigure the chipset when an AGP 2.x graphics card is installed; if X hangs on your ASUS KT400 system with NvAGP enabled and the installed graphics card is not an AGP 8x device, make sure that you have the latest system BIOS installed.