Antialiasing is a technique used to smooth the edges of objects in a scene to reduce the jagged "stairstep" effect that sometimes appears. By setting the appropriate environment variable, you can enable full-scene antialiasing in any OpenGL application on these GPUs.
Several antialiasing methods are available and you can select between them by setting the __GL_FSAA_MODE environment variable appropriately. Note that increasing the number of samples taken during FSAA rendering may decrease performance.
To see the available values for __GL_FSAA_MODE along with their descriptions, run:
nvidia-settings --query=fsaa --verbose
The __GL_FSAA_MODE environment variable uses the same integer values that are used to configure FSAA through nvidia-settings and the NV-CONTROL X extension. In other words, these two commands are equivalent:
export __GL_FSAA_MODE=5
nvidia-settings --assign FSAA=5
Note that there are three FSAA related configuration attributes (FSAA, FSAAAppControlled and FSAAAppEnhanced) which together determine how a GL application will behave. If FSAAAppControlled is 1, the FSAA specified through nvidia-settings will be ignored, in favor of what the application requests through FBConfig selection. If FSAAAppControlled is 0 but FSAAAppEnhanced is 1, then the FSAA value specified through nvidia-settings will only be applied if the application selected a multisample FBConfig.
Therefore, to be completely correct, the nvidia-settings command line to unconditionally assign FSAA should be:
nvidia-settings --assign FSAA=5 --assign FSAAAppControlled=0 --assign FSAAAppEnhanced=0
The driver may not be able to support a particular FSAA mode for a given application due to video or system memory limitations. In that case, the driver will silently fall back to a less demanding FSAA mode.
Fast approximate antialiasing is an antialiasing mode supported by the NVIDIA graphics driver that offers advantages over traditional multisampling and supersampling methods. This mode is incompatible with UBB, triple buffering, and other antialiasing methods. To enable this mode, run:
nvidia-settings --assign FXAA=1
nvidia-settings will automatically disable incompatible features when this command is run. Users may wish to disable use of FXAA for individual applications when FXAA is globally enabled. This can be done by setting the environment variable __GL_ALLOW_FXAA_USAGE to 0. __GL_ALLOW_FXAA_USAGE has no effect when FXAA is globally disabled.
Automatic anisotropic texture filtering can be enabled by setting the environment variable __GL_LOG_MAX_ANISO. The possible values are:
| __GL_LOG_MAX_ANISO | Filtering Type |
|---|---|
| 0 | No anisotropic filtering |
| 1 | 2x anisotropic filtering |
| 2 | 4x anisotropic filtering |
| 3 | 8x anisotropic filtering |
| 4 | 16x anisotropic filtering |
The __GL_SYNC_TO_VBLANK (boolean) environment variable can be used to control whether swaps are synchronized to a display device's vertical refresh.
Setting __GL_SYNC_TO_VBLANK=0 allows glXSwapBuffers to swap without waiting for vblank.
Setting __GL_SYNC_TO_VBLANK=1 forces glXSwapBuffers to synchronize with the vertical blanking period. This is the default behavior.
When sync to vblank is enabled with TwinView, OpenGL can only sync to one of the display devices; this may cause tearing corruption on the display device to which OpenGL is not syncing. You can use the environment variable __GL_SYNC_DISPLAY_DEVICE to specify to which display device OpenGL should sync. You should set this environment variable to the name of a display device; for example "CRT-1". Look for the line "Connected display device(s):" in your X log file for a list of the display devices present and their names. You may also find it useful to review Chapter 12, Configuring Multiple Display Devices on One X Screen "Configuring Twinview" and the section on Ensuring Identical Mode Timings in Chapter 18, Programming Modes.
If a display device is being provided by a synchronized RandR
1.4 Output Sink, it will not be listed under "Connected display
device(s):", but can still be used with __GL_SYNC_DISPLAY_DEVICE.
The names of these display devices can be found using the
xrandr command line tool. See
Synchronized RandR 1.4 Outputs
for information on synchronized RandR 1.4 Output Sinks.
The NVIDIA GLX implementation sorts FBConfigs returned by glXChooseFBConfig() as described in the GLX specification. To disable this behavior set __GL_SORT_FBCONFIGS to 0 (zero), then FBConfigs will be returned in the order they were received from the X server. To examine the order in which FBConfigs are returned by the X server run:
nvidia-settings --glxinfo
This option may be be useful to work around problems in which applications pick an unexpected FBConfig.
There are several cases where the NVIDIA OpenGL driver needs to wait for external state to change before continuing. To avoid consuming too much CPU time in these cases, the driver will sometimes yield so the kernel can schedule other processes to run while the driver waits. For example, when waiting for free space in a command buffer, if the free space has not become available after a certain number of iterations, the driver will yield before it continues to loop.
By default, the driver calls sched_yield() to do this. However, this can cause the calling process to be scheduled out for a relatively long period of time if there are other, same-priority processes competing for time on the CPU. One example of this is when an OpenGL-based composite manager is moving and repainting a window and the X server is trying to update the window as it moves, which are both CPU-intensive operations.
You can use the __GL_YIELD environment variable to work around these scheduling problems. This variable allows the user to specify what the driver should do when it wants to yield. The possible values are:
| __GL_YIELD | Behavior |
|---|---|
| <unset> | By default, OpenGL will call sched_yield() to yield. |
| "NOTHING" | OpenGL will never yield. |
| "USLEEP" | OpenGL will call usleep(0) to yield. |
The NVIDIA GLX implementation will hide FBConfigs that are associated with a 32-bit ARGB visual when the XLIB_SKIP_ARGB_VISUALS environment variable is defined. This matches the behavior of libX11, which will hide those visuals from XGetVisualInfo and XMatchVisualInfo. This environment variable is useful when applications are confused by the presence of these FBConfigs.
By default, the NVIDIA GLX implementation will not expose GLX protocol for GL commands if the protocol is not considered complete. Protocol could be considered incomplete for a number of reasons. The implementation could still be under development and contain known bugs, or the protocol specification itself could be under development or going through review. If users would like to test the client-side portion of such protocol when using indirect rendering, they can set the __GL_ALLOW_UNOFFICIAL_PROTOCOL environment variable to a non-zero value before starting their GLX application. When an NVIDIA GLX server is used, the related X Config option AllowUnofficialGLXProtocol will need to be set as well to enable support in the server.
On Linux, the NVIDIA GLX implementation will attempt to detect whether SELinux is enabled and modify its behavior to respect SELinux policy. By default, the driver adheres to SELinux policy boolean settings at the beginning of a client process's execution; due to shared library limitations, these settings remain fixed throughout the lifetime of the driver instance. Additionally, the driver will adhere to policy boolean settings regardless of whether SELinux is running in permissive mode or enforcing mode. The __GL_SELINUX_BOOLEANS environment variable allows the user to override driver detection of specified SELinux booleans so the driver acts as if these booleans were set or unset. This allows the user, for example, to run the driver under a more restrictive policy than specified by SELinux, or to work around problems when running the driver under SELinux while operating in permissive mode.
__GL_SELINUX_BOOLEANS should be set to a comma-separated list of key/value pairs:
__GL_SELINUX_BOOLEANS="key1=val1,key2=val2,key3=val3,..."
Valid keys are any SELinux booleans specified by "getsebool -a", and valid values are 1, true, yes, or on to enable the boolean, and 0, false, no, or off to disable it. There should be no whitespace between any key, value, or delimiter. If this environment variable is set, the driver assumes that SELinux is enabled on the system. Currently, the driver only uses the "allow_execmem" and "deny_execmem" booleans to determine whether it can apply optimizations that use writable, executable memory. Users can explicitly request that these optimizations be turned off by using the __GL_WRITE_TEXT_SECTION environment variable (see Disabling executable memory optimizations below). By default, if the driver cannot detect the value of one or both of these booleans, it assumes the most permissive setting (i.e. executable memory is allowed).
The NVIDIA OpenGL implementation normally does not enforce limits on dynamic system memory allocations (i.e., memory allocated by the driver from the C library via the malloc(3) memory allocation package). The __GL_HEAP_ALLOC_LIMIT environment variable enables the user to specify a per-process heap allocation limit for as long as libGL is loaded in the application.
__GL_HEAP_ALLOC_LIMIT is specified in the form BYTES SUFFIX, where BYTES is a nonnegative integer and SUFFIX is an optional multiplicative suffix: kB = 1000, k = 1024, MB = 1000*1000, M = 1024*1024, GB = 1000*1000*1000, and G = 1024*1024*1024. SUFFIX is not case-sensitive. For example, to specify a heap allocation limit of 20 megabytes:
__GL_HEAP_ALLOC_LIMIT="20 MB"
If SUFFIX is not specified, the limit is assumed to be given in bytes. The minimum heap allocation limit is 12 MB. If a lower limit is specified, the limit is clamped to the minimum.
The GNU C library provides several hooks that may be used by applications to modify the behavior of malloc(3), realloc(3), and free(3). In addition, an application or library may specify allocation symbols that the driver will use in place of those exported by libc. Heap allocation tracking is incompatible with these features, and the driver will disable the heap allocation limit if it detects that they are in use.
WARNING: Enforcing a limit on heap allocations may cause unintended behavior and lead to application crashes, data corruption, and system instability. ENABLE AT YOUR OWN RISK.
The NVIDIA OpenGL driver utilizes a shader disk cache. This optimization benefits some applications, by reusing shader binaries instead of compiling them repeatedly. The related environment variables __GL_SHADER_DISK_CACHE and __GL_SHADER_DISK_CACHE_PATH, as well as the GLShaderDiskCache X configuration option, allow fine-grained configuration of the shader cache behavior. The shader disk cache:
is always disabled for indirect rendering
is always disabled for setuid and setgid binaries
by default, is disabled for direct rendering when the OpenGL application is run as the root user
by default, is enabled for direct rendering when the OpenGL application is run as a non-root user
The GLShaderDiskCache X configuration option forcibly enables or disables the shader disk cache, for direct rendering as a non-root user.
The following environment variables configure shader disk cache behavior, and override the GLShaderDiskCache configuration option:
| Environment Variable | Description |
|---|---|
| __GL_SHADER_DISK_CACHE (boolean) | Enables or disables the shader cache for direct rendering. |
| __GL_SHADER_DISK_CACHE_PATH (string) | Enables configuration of where shader caches are stored on disk. |
If __GL_SHADER_DISK_CACHE_PATH is unset, caches will be stored in $XDG_CACHE_HOME/.nv/GLCache if XDG_CACHE_HOME is set, or in $HOME/.nv/GLCache if HOME is set. If none of the environment variables __GL_SHADER_DISK_CACHE_PATH, XDG_CACHE_HOME, or HOME is set, the shader cache will be disabled. Caches are persistent across runs of an application. Cached shader binaries are specific to each driver version; changing driver versions will cause binaries to be recompiled.
The NVIDIA OpenGL driver supports offloading its CPU computation to a worker thread. These optimizations typically benefit CPU-intensive applications, but may cause a decrease of performance in applications that heavily rely on synchronous OpenGL calls such as glGet*. They are enabled by default on Linux (under certain conditions), but will self-disable if they are not increasing performance.
Setting the __GL_THREADED_OPTIMIZATIONS environment variable to "1" before loading the NVIDIA OpenGL driver library will force (if the requirements covered below are met) these optimizations to be enabled for the lifetime of the application, with no self-disable possible. This is how the driver has historically behaved since threaded optimizations (disabled by default) were introduced. It is not advised to force these optimizations enabled. Relying on the automated mechanism is preferable. Setting the variable to "0" will force these optimizations to be disabled. Not setting the variable at all will attempt to enable the optimizations, but with the self-disabling mechanism activated. This mechanism is, among the Unix platforms supported by the NVIDIA driver, only functional on Linux. Where it is not functional, the optimizations are disabled by default.
Please note that these optimizations will only work if the target application dynamically links against pthreads. If this isn't the case, the dynamic loader can be instructed to do so at runtime by setting the LD_PRELOAD environment variable to include the pthreads library.
Additionally, these optimizations require Xlib to function in thread-safe mode. The NVIDIA OpenGL driver cannot reliably enable Xlib thread-safe mode itself, therefore the application needs to call XInitThreads() before making any other Xlib call. Otherwise, the threaded optimizations in the NVIDIA driver will not be enabled.
This option enables the glBlitFramebuffer() scissor test, which must be enabled for glBlitFramebuffer() to behave in a conformant manner. Setting the __GL_ConformantBlitFramebufferScissor environment variable to 0 disables the glBlitFramebuffer() scissor test, and setting it to 1 enables it. By default, the glBlitFramebuffer() scissor test is enabled.
Some applications have bugs which cause them to not display properly with a conformant glBlitFramebuffer(). See Chapter 9, Known Issues for more details.
When a G-SYNC-capable monitor is attached, this option controls whether G-SYNC, also called “variable refresh rate”, can be used. Setting the __GL_GSYNC_ALLOWED environment variable to 0 disables G-SYNC. Setting it to 1 allows G-SYNC to be used when possible.
When G-SYNC is active and __GL_SYNC_TO_VBLANK is disabled, applications rendering faster than the maximum refresh rate will tear. This eliminates tearing for frame rates below the monitor's maximum refresh rate while minimizing latency for frame rates above it. When __GL_SYNC_TO_VBLANK is enabled, the frame rate is limited to the monitor's maximum refresh rate to eliminate tearing completely.
G-SYNC cannot be used when workstation stereo or workstation overlays are enabled, or when there is more than one X screen. In addition, G-SYNC cannot be used when an SLI mode other than Mosaic is enabled.
By default, the NVIDIA driver will attempt to use optimizations which rely on being able to write to executable memory. This may cause problems in certain system configurations (e.g., on SELinux when the "allow_execmem" boolean is disabled or "deny_execmem" boolean is enabled, and on grsecurity kernels configured with CONFIG_PAX_MPROTECT). When possible, the driver will attempt to detect when it is running on an unsupported configuration and disable these optimizations automatically. If the __GL_WRITE_TEXT_SECTION environment variable is set to 0, the driver will unconditionally disable these optimizations.
Some applications may use GLSL shaders that reference global variables defined only in an OpenGL extension without including a corresponding #extension directive in their source code. Additionally, some applications may use GLSL shaders version 150 or greater that reference global variables defined in a compatibility profile, without specifying that a compatibility profile should be used in their #version directive. Setting the __GL_IGNORE_GLSL_EXT_REQS environment variable to 1 will cause the driver to ignore this class of errors, which may allow these shaders to successfully compile.
The __GL_SHOW_GRAPHICS_OSD (boolean) environment variable can be used to control whether the graphics API visual indicator is rendered on top of OpenGL and Vulkan applications.
This indicator displays various information such the graphics API in use, instantaneous frame rate, whether the application is synced to vblank, whether the application is blitting or flipping.